Right to Work Checks from 1 October 2026: The Complete Practical Guide for UK Employers

Employer conducting a Right to Work check on a jobseeker at a modern office. Fennec Lawyers.

All employers in the UK are legally obligated to prevent illegal working by verifying that each employee possesses valid permission to work prior to commencing employment.

Conducting right to work checks before employment is essential for meeting this legal requirement. Adhering to prescribed procedures and maintaining accurate records enables employers to establish a ‘statutory excuse’, thereby protecting against civil penalties if it is subsequently determined that a worker lacked permission to work.

Effective 1 October 2026, new regulations regarding right to work checks will be implemented, accompanied by an updated Code of Practice and revised guidance available on GOV.UK. Employers are advised to thoroughly review these changes and update recruitment procedures and human resources policies to maintain compliance.

Employer conducting a Right to Work check on a jobseeker at a modern office. Fennec Lawyers

Updates taking effect from 1 October 2026

  1. Using a RtW DVSP: Employers can use a right to work digital verification service provider (RtW DVSP) to assist with identity verification, including facial recognition. Providers used for prescribed right to work checks must be registered for right to work services. The list of government-registered organisations can be found here. 
  2. Extended liability: The Scheme has been expanded to include individual subcontractors, online matching platforms, and worker contracts. In some types of arrangements, responsibility for civil penalties may go beyond the immediate employer.
  3. Revised terminology: The updated Right to Work Scheme now includes all working arrangements and introduces the new term “Right to Work Digital Verification Service Provider” (RtW DVSP).
  4. Revised list of acceptable documents: Digital documents issued by the government are now accepted as proof of an individual’s name and National Insurance Number.

Who is responsible for carrying out right to work checks?

The Right to Work Scheme now applies to a broader range of working arrangements, not just standard employment, and the responsible person or organisation must carry out the relevant check before the work or service starts.

  • Standard employment: The immediate employer is responsible for carrying out the required Right to Work check.

 

Example: A nurse is employed directly by a hospital, working set shifts as a permanent member of staff. They are paid through the hospital’s payroll and provide nursing services directly to the hospital’s patients. The hospital is responsible for checking the nurse’s Right to Work before they commence employment.

 

  • Individual subcontractor: The person or organisation hiring the individual subcontractor is responsible for the Right to Work check.

 

Example: A car driver signs up to work through a ride-hailing platform, logging into the app whenever they want to work. They accept ride requests and are paid per completed trip. The platform is responsible for checking the driver’s Right to Work before they are allowed to accept rides.

 

  • Online matching platform: The required check must be completed by the online matching service within scope.

 

Example: A plumber uses an online platform to find work. The service matches them with homeowners, and the plumber carries out the job personally. The platform is responsible for checking the plumber’s Right to Work before matching them to homeowners.

 

  • Worker’s contract: Responsibility for the check lies with the person or organisation employing or engaging the worker.

 

Example: A waiter registers with a recruitment agency that supplies temporary staff to bars and restaurants. The agency engages the waiter on a contract for services, and the waiter accepts short-term assignments as they are offered. The recruitment agency is responsible for checking the waiter’s Right to Work before they are placed in any assignment.

Case studies on extended liability

The case studies below illustrate organisations that may fall within the scope of extended liability and must satisfy all prescribed requirements in order to establish a statutory excuse.

Case study 1: Food Delivery Platform with Substitute Workers 

A person signs up to work through a food delivery platform that classifies them as self-employed and pays per delivery completed. The individual decides when to work and is permitted to use a substitute if unavailable. On occasion, they ask a friend to complete deliveries on their behalf.

In this scenario, the delivery platform is responsible for conducting Right to Work checks not only on the registered person but also on any substitute workers who may carry out deliveries. This ensures the platform maintains a statutory excuse against liability for illegal working, even when work is performed by a substitute.

Case Study 2: Online Trade Matching

A homeowner uses an online matching service to find a painter for a home renovation project. The platform provides details of local painting businesses, and the homeowner contracts directly with the selected painting services business. The business then sends one of its workers to carry out the painting work at the property.

In this arrangement, the online matching service is the organisation responsible for conducting Right to Work checks on the workers before they are matched to homeowners. This duty applies even though the homeowner contracts directly with the painting business and the business deploys its own staff, because the platform facilitates the introduction and falls within the scope of extended liability.

Case Study 3: Construction Subcontracting

A main contractor is engaged to build a new office complex. The contractor uses subcontracted businesses to provide workers to deliver elements of the project, such as electrical installation and plumbing.

In this scenario, the main contractor is the organisation responsible for conducting Right to Work checks on all workers supplied by subcontracted businesses before they begin work on site. This duty arises because the main contractor falls within the scope of extended liability and must ensure compliance across the entire supply chain to maintain a statutory excuse.

How to establish a statutory excuse to protect against extended liability

In order to establish a statutory excuse against extended liability, an organisation must fully satisfy all prescribed requirements and retain evidence demonstrating compliance. The organisation is required to keep up-to-date records that demonstrate the required controls have been put in place, and must supply this documentation to the Home Office upon demand.

  • Substitute control measures: Make sure any substitute worker’s Right to Work is verified before they start providing the work or service.

 

  • Identity confirmation systems and procedures: Demonstrate that the individual performing the work is the same person whose Right to Work was verified.

 

  • Written agreement clauses: Ensure the necessary terms are documented in writing prior to the commencement of work or service, clearly specifying who is responsible for conducting checks and maintaining controls over any additional subcontracting. 

Choosing the appropriate right to work check

Right to work checks using a share code

To conduct a Right to Work check using a share code, the jobseeker must provide their share code and date of birth. The employer then accesses the GOV.UK online service at gov.uk/view-right-to-work, enters the jobseeker’s 9‑character share code (beginning with “W”) and date of birth, verifies the photo and work conditions displayed, makes sure their full employer or business name is recorded, and retains a dated copy of the result for the duration of the employment and for 2 years afterwards.

For remote Right to Work checks, we advise running the online check during a live video call with the jobseeker, so you can view their Home Office record in real time and confirm that the photo and details match the person you are speaking to. 

What to check in a jobseeker’s Right to Work when using their share code

  • The expiry date of their permission to enter or remain in the UK.
  • Whether their right to work is time‑limited.
  • That the photograph shown in the online check matches the jobseeker (in person or via live video call).
  • The number of hours they are allowed to work.
  • Any work restrictions, such as those that apply to students or specific job types.

 

Manual right to work check 

A manual Right to Work check is conducted when a jobseeker is unable or does not use the online share code service, for example, a British passport holder. This process relies on original physical documents from the Home Office’s List A or List B and must be completed before employment starts to establish a statutory excuse.

Step 1: Obtain original documents

Step 2: Check the documents in the jobseeker’s presence

  • Check that the documents are genuine, original, and unaltered, and belong to the person presenting them.
  • If you prefer, you may use a Right to Work Digital Verification Service Provider (RtW DVSP).

Step 3: Copy and retain records 

  • Make a clear, unalterable copy of each document (e.g. photocopy or secure PDF). 
  • Store these copies securely for the whole period of employment and for 2 years after the employment ends.

 

Using a Right to Work Digital Verification Service Provider (RtW DVSP)

An RtW DVSP is a registered digital identity service that enables employers to carry out prescribed digital Right to Work checks for certain individuals, using technology that complies with Home Office requirements.

Step 1: Choose a registered RtW DVSP 

Step 2: Verify specified documents accepted 

  • British passports, Irish passports and Irish passport cards, whether valid or expired by no more than 6 months.
  • Approved digital documents from List A or List B.
  • Facial recognition technology to confirm identity.

Step 3: Copy and retain records 

  • Keep a clear, readable, unaltered copy of the DVS output.
  • Store these copies securely for the whole period of employment and for 2 years after the employment ends.

 

Using the Employer Checking Service 

The Employer Checking Service (ECS) is a complimentary service provided by the Home Office that allows employers to confirm a worker’s right to work when they cannot use the standard online share code check or a manual document check, for example while the jobseeker is waiting for a decision on a visa application.

Step 1: Confirm an ECS check is appropriate 

  • Confirm that the jobseeker cannot provide a valid online share code or produce acceptable original documents from List A or List B

Step 2: Submit a request

  • Use the Employer Checking Service (ECS) online form or call 0300 790 6268 and provide the jobseeker’s Home Office reference number.

Step 3: Home Office response 

The Home Office will usually respond within 5 working days with a clear outcome.

  • Positive Verification Notice: The individual is permitted to work, and a time‑limited statutory excuse is established.
  • Negative Verification Notice: The Home Office has not confirmed a right to work, so no statutory excuse arises from the ECS outcome. 

Step 4: Copy and retain records 

  • Keep a clear, readable, unaltered copy of the ECS outcome.
  • Store these copies securely for the whole period of employment and for 2 years after the employment ends.

Follow-up checks for time-limited permissions

Employers must conduct repeat or follow-up checks when an employee’s initial right-to-work check indicates time-limited permission to work in the UK. The follow-up check should be completed on or before the expiration date of the employee’s permission.

If the employee provides evidence of continued permission to work, the employer should complete an additional right-to-work check. If the employee cannot provide such evidence and does not have access to an online account or cannot use the service, either the employer or the employee should contact the UKVI Resolution Centre at 0300 790 6268. 

If the initial check confirms that the employee has settled status or pre-settled status under the EU Settlement Scheme, no follow-up check is necessary.

Additional point to check: Any work restrictions

As part of the right-to-work check, you should confirm whether the individual’s immigration status imposes any restrictions on the type or amount of work they may undertake, as these restrictions can vary depending on their immigration category.

  • Students: A student’s right to work depends on the conditions attached to their visa. Students are generally allowed to work up to 20 hours per week during term time. Work placements should be assessed separately and do not form part of a student’s permitted employment. 
  • Volunteering and voluntary work: These are distinct activities. If you are unsure whether an activity counts as work, voluntary work, or volunteering, independent legal advice should be sought.
  • Supplementary employment: You should verify that the Skilled Worker meets the relevant conditions for undertaking supplementary employment.

How Fennec Lawyers can help

Fennec Lawyers compliance specialist

RTW systems and statutory excuse

We review your RTW processes to confirm you are checking that all sponsored workers are legally allowed to work for you in the roles they hold, and that you are keeping the evidence needed to establish a statutory excuse against civil penalties.

Visa monitoring and mock audits

We assess your RTW and record‑keeping systems through mock audits that mirror Home Office compliance visits, checking in particular that you have effective systems to track visa expiry dates and follow‑up checks. We then provide clear, practical action plans to close any gaps.

Training and templates

We train HR, recruitment and line managers to carry out compliant RTW checks, use share codes correctly and avoid common mistakes. This training is supported with tailored checklists, templates and guidance notes for day‑to‑day use.

Support with complex cases

We advise on more complex RTW scenarios, including sponsored workers, students with restricted hours, and individuals whose status needs to be confirmed using the Employer Checking Service, helping you manage risk while keeping recruitment moving.

 

Contact us to arrange personalised advice tailored to your circumstances. You can also visit our Knowledge Centre for further guidance on UK immigration matters.

Useful links